Brand New, Perfect FlameThrower
Sequential Turn Signal System for a 1996-2004 Mustang Coupe, Convertible
or Fastback, GT with factory standard brake and turn signal lighting and
wiring, except those with Amber turn signal systems
What you get is One Pair (one left side and one right side) of rear Brake
and Sequential Turn Signal Harnesses. Wired in each harness assembly is
our Sequential Turn Signal Controller.
The FlameThrower System comes with a
super-easy Installation Guide, Wiring Diagrams and Mustang Brake &
Tail Light System Troubleshooting Guide. The FlameThrower
is dirt simple to install.
Saves you time by not having to splice or wire anything to install these
harnesses on your Mustang. Simple Plug and Play painless installation. And
the installation is completely reversible if you want to move it to
another Mustang.
Installation is a snap: Remove your Brake Light Lens Assemblies, pull the
connectors for each lamp from the lens assembly, install our harnesses,
and reinstall lens assemblies. Done.
This is a small wrench operation, simply remove 4 nuts - No Wire Cutting,
No Splicing into your system, Simply Plug and Play.
As a bonus, the FlameThrower Sequential
Harness System actually adds another brake light function to you existing
2 brake light harness. Now you get 1/3 brighter brake
lights along with your new Sequential Turn Signals.
The FlameThrower is instantly
reversible back to your original incandescent system, if you want to
transfer your Sequential Turn Signals system to another vehicle.
Review the Sequencer Movie above. This is what your new FlameThrower
Sequential Turn Signals will do for you.
NOTE: The FlameThrower Sequential
Brake Light system is compliant in all 50 states (thanks to Thunderbird,
Cougar, the new Mustang, and other production vehicles). If there is a
question, before you buy check with your local transportation authorities.
Don't spoil your driving fun with an equipment violation, if sequential
turn signal lights are not approved in your local area!
State DOT requires that a vehicle's brake light comes on and stays on as
long as the brake pedal is pressed. Our system is compatible - a minimum
of one brake light comes on and stays on (on each side), then the
remaining two segments on each side sequence once and then remain on,
until the brake pedal is released. .
Should for any reason the Sequencer fail, our system is designed to light
at least one brake light and all of the parking lights on each side -
enough to get you home safely.
These FULLY TESTED units are being offered WITH A FULL 90-DAY PARTS REPAIR
OR REPLACEMENT WARRANTY (our choice) ON THE SEQUENCER HARNESS. Customer is
responsible for removal, installation and warranty shipping costs.
* Except Amber Tail Light
Systems
|